KnuKonceptz Bassik 2 Way 4 Gauge to 4 / 8 Gauge Mini ANL Fuse Block w Fuses

Description

Amp Kits
Fuse Blocks
Fuses
HDMI Cables
Power Wire
RCA Cables
Sound Dampeners
Speaker Wire
Terminals
Amp Kits
Fuse Blocks
Power Wire
RCA Cables
Speaker Wire
Terminals
Description
KnuKonceptz 4 Gauge 2 Way Fuse Block
The BK-424 inputs accepts 4 – 8 gauge and output two 4 – 8 gauge power wire without the use of adapters. Oversized allen screws can secure either gauge without any modification or additional parts to complicate the design.
Bassik – simple, clean, easy. This is the foundation of what KnuKonceptz calls Bassik. Easy to install, simple to connect and cost effective. This block is shown in satin nickel finish with polished nickel plated allen screws and smoke black base. The BK-424 includes two fuses to configure this block for power applications.
PLEASE NOTE FUSE SIZE IN ebay ORDER NOTES
Fuses available – 20 / 30 / 40 / 50 / 60 / 80 / 120
We will ship 60A x 2 if no fuses are noted!
Specifications
Product FAQ
Additional Images
Related Products
Specifications
KnuKonceptz BK-424 2 Way Fuse Block
Dimensions
2.35″(L) x 1.75″(W) x 1.10″(H)
Input Gauge
4 Gauge x 2
Output Gauge
Two 4 or 8 Gauge
Fuse Type
Mini-ANL
Finish
Nickel Silver
Back to top
Product FAQ
Q:
How do I determine what size fuses I need for this fuse block?
A:
Each output of a fuse distribution block normally is connected to a single amplifier. Each amplifier will have either a fuse on board or the manufacture will state within the manual’s installation guide or spec sheet what the max fuse rating or current draw of the amplifier is. If your amp has three 30A fuses on boards, you want a 100A fuse for that particular output of this block (90A is not an option we offer). If the second amp has a single 40A fuse, then a 40A fuse goes into that output of the block and thus a 100A and 40A would be required.
Q:
This block has two inputs, do I need to use both?
A:
The BK-424 has two input ports, only one input is required to power both fused outputs. The second port is optional and can be used to connect additional rear mounted batteries, a capacitor, or to daisy chain additional blocks together. Having the second port makes this fuse block more flexible to the installer than a single port block.
Q:
Can I use this block as a ground block?
A:
Yes, KnuKonceptz offers ground links to turn this block into a 2 Way Ground Block. These Mini-ANL buss bars replace the fuse and allow the BK-424 to be used from a common grounding point.
Back to top
Related Products
KnuKonceptz Amp Kits
Pair this block with one of our amp kits for a two amp installation
KnuKonceptz Battery Cable
Connect your knu block with one of our three series of cables
KnuKonceptz Tinned Copper Ring Terminals
Tinned copper rings are a perfect way to terminate your cable. Our heat shrink is glue lined to create a water tight seal.
KnuKonceptz Mini-ANL fuses
Add some spare fuses to your order, just in case!
Back to top
About
Policy
Shipping
FAQ